Pfizer laser is a type of electronic and mechanical device that is used for engraving or cutting different materials, and the advantage of fiber laser is the high precision of this device, and its disadvantage is that it is incompatible with some materials. The laser fiber device is the choice of efficiency for advertising use and inserting your logo or information on your items and products. The fiber laser device lens works based on three elements, which are briefly explained below:
Hard box 3 pieces
1- Speed
The speed element in fiber laser determines the execution time of the work process, which can be changed from 100 milliseconds to 10000 milliseconds. The speed of doing the work can be different according to the size and material. In general, less engraving is done in less time, and more time is used for engraving.
2- power
Power or power in fiber laser determines the amount of power used to provide laser light. In other words, the higher the power value used in the settings, the more heat the fiber laser engraves on the work. The laser power can be varied from 10 to 100, which should be adjusted according to the size and movement of the work.
3- Frequency
To explain the frequency, it is better to consider one or two fans. One is a normal lighter and the other is an atomic lighter. In case the frequency is set to zero. For example, a lighter works like a normal candle flame, but every time the frequency increases, the lighter flame becomes sharp and powerful and acts like an atomic lighter. The frequency can be adjusted from 10 to 300 Hz.
Laser on metals (plates, pens, watches, etc.)
Laser on the plateau is one of the most important tasks of fiber laser. Fiber laser works well on almost all metals. Such as: iron, copper, aluminum, gold, etc. Metal products that are usually used for fiber laser are the following:
Laser engraving on a metal pen
Automatic hard box production
Laser on plastic
Laser fire on plastic material can work very well considering the conditions. Thick plastic material (more than 1 mm) and opaque (not transparent) usually gives the best results from air conditioners. The best plastic products for fiber laser include the following:
Laser on plastic pen
Laser on flash and power bank
Laser on spy
Laser on the cover of artificial leather and hardcover
Laser service on the cover of the due date or metal plate is one of the most important parts in the production of due date. According to the type of leather, the artificial leather cover is usually well lasered and engraved on it. However, hardcover terms generally provide better results. Our suggestion for mature artificial leather producers who want laser on the gel is to perform the necessary tests before production on the material they want and then proceed to purchase in bulk.
Fiber laser device software settings
Fiber laser provides the possibility of changes in the settings of the device using the exclusive software of Fiber company. This software has the following three parts:
Import or draw a shape to be engraved on the engraving surface.
Environment for painting or typing information for engraving.
Laser settings section
In the laser settings section, you can change the default values to get the best engraving on your desired surface.
Deep engraving on the surface
Advantages of deep metal engraving with fiber laser
In the world of industrial production, precision and efficiency for success
fiberlaser.ir
Hard box 3 pieces
1- Speed
The speed element in fiber laser determines the execution time of the work process, which can be changed from 100 milliseconds to 10000 milliseconds. The speed of doing the work can be different according to the size and material. In general, less engraving is done in less time, and more time is used for engraving.
2- power
Power or power in fiber laser determines the amount of power used to provide laser light. In other words, the higher the power value used in the settings, the more heat the fiber laser engraves on the work. The laser power can be varied from 10 to 100, which should be adjusted according to the size and movement of the work.
3- Frequency
To explain the frequency, it is better to consider one or two fans. One is a normal lighter and the other is an atomic lighter. In case the frequency is set to zero. For example, a lighter works like a normal candle flame, but every time the frequency increases, the lighter flame becomes sharp and powerful and acts like an atomic lighter. The frequency can be adjusted from 10 to 300 Hz.
Laser on metals (plates, pens, watches, etc.)
Laser on the plateau is one of the most important tasks of fiber laser. Fiber laser works well on almost all metals. Such as: iron, copper, aluminum, gold, etc. Metal products that are usually used for fiber laser are the following:
Laser engraving on a metal pen
Automatic hard box production
Laser on plastic
Laser fire on plastic material can work very well considering the conditions. Thick plastic material (more than 1 mm) and opaque (not transparent) usually gives the best results from air conditioners. The best plastic products for fiber laser include the following:
Laser on plastic pen
Laser on flash and power bank
Laser on spy
Laser on the cover of artificial leather and hardcover
Laser service on the cover of the due date or metal plate is one of the most important parts in the production of due date. According to the type of leather, the artificial leather cover is usually well lasered and engraved on it. However, hardcover terms generally provide better results. Our suggestion for mature artificial leather producers who want laser on the gel is to perform the necessary tests before production on the material they want and then proceed to purchase in bulk.
Fiber laser device software settings
Fiber laser provides the possibility of changes in the settings of the device using the exclusive software of Fiber company. This software has the following three parts:
Import or draw a shape to be engraved on the engraving surface.
Environment for painting or typing information for engraving.
Laser settings section
In the laser settings section, you can change the default values to get the best engraving on your desired surface.
Deep engraving on the surface
Advantages of deep metal engraving with fiber laser
In the world of industrial production, precision and efficiency for success
fiberlaser.ir